Qingdao Ruly Steel Engineering Co.,Ltd
One-stop service for steel structure project
Add to Cart
Industrial Prefabricated Structural Steel Framing Warehouse Construction
Industrial Prefabricated Structural Steel Framing Warehouse Construction. The overall floorage of this Industrial Prefabricated Structural Steel Framing Warehouse Construction is 7,200 square meters. It is a portal frame steel structure building, double span double ridge. Portal frame steel building could provide large space and easy to build.
We can design and fabricate customized steel structure components for light and heavy steel structure buildings in protal frame and dome frame, such as warehouse, workshop, storage, hangar, chicken shed, steel shed for market and ground parking, supermarket , high rise steel office buiding, factory , plant, exhibition hall, gym, dormitory building, oli&gas, power station, infrastructure buildings, etc.
New warehouse with covered area of 7200m².
| Name | Industrial Prefabricated Structural Steel Framing Warehouse Construction |
| Structure Type | portal frame, two ridges, two spans |
| Length | 120m |
| Width | 60m |
| Eave Height | 9m |
| Roof Slope | 20% |
| Gable Wall Column Spacing | 7.5m |
| Roof | 0.5mm thick steel galvanized board
|
| Wall | 0.5mm thick steel galvanized board+3m block wall |
| Door | Sliding door |
| Window | Ribbon Skylight |
| Height difference between indoor and outdoor | 300mm |
| NO. | Item | Specification |
| 1 | Main Pillar & Beams | Q345B |
| 2 | Roof Purlins | C200*70*20*2.5 Galvanize |
| 3 | Tie Bar | Φ114*4 |
| 4 | Pillar Supporters | Φ20 |
| 5 | Tie rod | Φ12,Φ32*2.5 |
| 6 | Kneebracing | L50*4 |
| 7 | Foundation bolt | M24 |
| 8 | General Bolts | C Grade |
| 9 | Bolt screw | Φ19 |
| 10 | High Strengthened Bolts | 10.9 Grade |
| 11 | Roof Panel | 0.5mm Galvanized Steel Plate |
| 12 | Ribbon skylight | 1.2mm FRP |
| 13 | Floor Steel deck | 1.00 mm steel plate |
| 14 | Doors | Sliding door |
| 15 | Windows | Steel windows |
| 16 | Gutters | 3mm thick galvanized steel |
| 17 | Edge and corner wrapping | 0.5mm Galvanized Steel Plate |
| 18 | Fans | |
| 19 | Accessories | |
| 20 | Down pipe | Φ140PVC |
The floor space of our steel structre fabrication factory is 35,000㎡, and the workshop area is 20000㎡. We own three light/heavy H steel production lines, BOX production lines, C/Z purlin production lines and various types of profiling steel sheet machines with advanced equipment such as plasma cutting machine.
1: We provide shop drawing before installation.
2. Then our engineer guide on site for installation
Just feel free to fill the form based on what you know.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |